Canon-imageRUNNER-2230 E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E010 0001 Error Code
E010 0001
Description :
The rotation of the main motor is faulty.
Causes :
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are looking at this article and have exposure to this error and want to contribute make sure you leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the situation then I will answer.
Always remember, not every error is absolutely identical. What treats the issue one time may not fix it the next time. While the help and advice in this text originates from the service manual and in most cases should get your machine ready to go, sometimes other variables could possibly be in play.
