Canon imageRUNNER 3025N Fuser Removal and Replacement FM3-1278-000, FM2-0356-000

 

Canon imageRUNNER 3025N Fuser Removal and Replacement

Below you will find the illustrated Canon imageRUNNER 3025N Fuser Removal and Replacement Instructions.

E000 0000 The fixing temperature fails to increase.
In the course of start-up control, the thermistor reading is less than 30 deg C 1 sec after the start of power supply or is less than 70 deg C 2 sec after the start of power supply; the machine will identify an error condition if any of the foregoing continues for 200 msec or more.

E001 0000 The thermistor detects overheating.
The thermistor detects 235 deg C for 200 msec or more continuously.
A hardware circuit detects overheating in relation to the thermistor (main or sub).

E001 0002 The sub thermistor detects overheating.
The thermistor detects 295 deg C or more for 200 msec or more continuously.

E002 0000 The fixing temperature fails to reach a specific level.
1. In the course of start-up control, the thermistor detects a temperature lower then 115 deg C for 200 msec continuously after it has detected 100 deg C.

2. The thermistor detects a temperature less than 150 deg C for 200 msec or more continuously after it has detected 140 deg C.

3. The thermistor detects a temperature lower than 165 deg C for 20 msec or more continuously 1 sec after it has detected 160 deg C.

E003 0000 The fixing temperature has dropped to an abnormally low level.
In the course of normal temperature control, the thermistor detects a temperature lower than 140 deg C for 20 msec or more continuously.

E007 0000 The fixing film rotates in an abnormal way.
The reading of the main thermistor is in excess of 100 deg C with the fixing motor in a locked state and, in addition, the machine fails to detect the marker signal for 6 sec.

E014 0000 The machine detects a fixing motor error.
During operation, the machine detects an overload condition continuously for 3 sec or more.

Removing the Right Cover (rear)
1) Open the pedestal right door (1). (if equipped with a 2-Cassette Pedestal- Y2)
2) Open the right lower door (2).
3) Remove the 5 screws (3), and detach the right cover (rear) (4).

Removing the Right Door – 0007-7879 iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
4) Open the right door.
5) Remove the screw (1), and detach the fixing plate (2).
6) Remove the joint shaft (1), and free the extension delivery unit (2) from the right door.
7) Disconnect the connector (1), and remove the reuse band (2); then, remove the 2 screws (M4x8; RS tightening).
8) While freeing the hinge assembly (2), detach the right door.

Attaching the Right Door
9) Match the hinge (1) found at the bottom of the right door against the lug.
10) Engage the hinge (2) found on the top of the right door with the hook found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close the right door first.

Canon imageRUNNER 3025N Fuser Replacement

Removing the Right Door – iR2270 / iR2870 / / iR2270N / / iR2870N / iR2230 / / / iR3530 /
11) Open the right door.
12) Remove the reuse band (1), and disconnect the connector (2).
13) Remove the 2 screws (M4x8; RS tightening), and detach the right door.

Attaching the Right Door
14) Match the hinge (1) found at the bottom of the right door against the lug.
15) Engage the hinge (2) found on the top of the right door with the hook found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close the right door first.

Canon imageRUNNER 3025N Fuser Removal and Replacement
16) Remove the screw (1), and detach the harness cover (2).
17) Disconcert the 3 connectors (1).
18) Remove the 4 screws (1).
19) Detach the fixing unit (1) toward the front.
When mounting the harness cover (1), be sure to keep the harness (2) within the space (3) indicated in the figure so that the harness (2) will not come into contact with the gear (4).


Canon FM2-0358-000 Fixing Film Assembly (Unit) – 120 Volt (Genuine) – $184.95


Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95

We will be happy to hear your thoughts

Leave a reply

Shopping cart