Canon imageRUNNER 3025 E000, E001, E002, E003, Error Code Reset

 

Canon imageRUNNER 3025 E000, E001, E002, E003 Error Code Reset

On most Canon machines, if they get a fuser error they need to be put into service mode to clear the message. Below you will find the Canon imageRUNNER 3025 E000, E001, E002, E003 Error Code Reset Procedure.

Reason for Canon imageRUNNER 3025 E000, E001, E002, E003 Error Code stoppage.

The main reason why these machines require special attention for these errors is because it can lead to additional damage in certain circumstances like overheat errors. In most cases, I would recommend letting the machine sit for twenty minutes to cool down, perform the reset, then see what happens.

If it happens again, time to think about replacing the fuser, rebuilding the fuser, or calling for service. If it starts working then I usually just tell my customers to keep an eye on it. These errors can happen for no apparent reason. Power outages, windy days, lightening, and other similar issues can cause these accidental errors.

Canon imageRUNNER 3025 E000, E001, E002, E003 Error Code Reset Steps

1) Press the asterisk key ” ” on the control panel.
2) Press the 2 and 8 keys of the keypad at the same time.
3) Press the asterisk key ” ” on the control panel.
In response to the foregoing key operations, the machine will bring up the following Initial screen:
Canon imageRUNNER 3025  Service Mode Display
Scroll the menus in this order : COPIER>FUNCTION>CLEAR>ERR.

Canon imageRUNNER 3025 E000 E001 E002 E003 Error Code Reset

Clearing an error code
(Object error code: E000/E001/E002/E003)
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.


Canon FM2-0358-000 Fixing Film Assembly (Unit) – 120 Volt (Genuine) – $184.95


Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95

We will be happy to hear your thoughts

Leave a reply

Shopping cart