Canon imageCLASS MF7470 Fuser Removal – Replacement Guide FM3-3651-000, FM0-0160-000

 

Canon imageCLASS MF7470 Fuser Removal – Replacement Guide FM3-3651-000, FM0-0160-000

These fusers are rated at around 150,000 pages. Like most other Canon fusers they tend to last that long if not longer. However, they eventually will need to be replaced. Below you will find the Canon imageCLASS MF7470 Fuser Removal – Replacement instructions along with links to purchase a replacement fuser if needed.



Canon imageCLASS MF7470 Fuser Removal – Replacement Guide


1. Draw out the drum unit.
2. Detach the rear cover.
3. detach the left cover “rear”.
4. Disconnect the connector “1” of the junction harness and remove the reusable band “2”, then remove the earth wire “3”.
Remove Screw “4”, 1 pc.
5. Remove the screw “1” securing the door support band. Remove the connector “2” and reusable band “3”, and release the duplex unit harness from the wire saddle “4”.

Canon imageCLASS MF7470 Fuser Removal - Replacement
6. Open the left door until it sops and pull out the hinge shaft “1”.
7. Lift the left door with both hands to release it from the door rotation shaft “1”, and then remove the left door.
8. Detach the inner cover “1” at the upper front.
Remove Screw “2”, 2 pcs.
9. Detach the heater harness cover “2”. Disconnect the connector “3”.
Remove Screw “1”, 1 pc.
10. Disconnect the two connectors “1”, and then release the fixing unit harness from the wire saddles “2”.
11. Raise the delivery upper guide “1”. Remove the fixing unit “3”.
Remove Screw “2”, 3 pcs.


We will be happy to hear your thoughts

Leave a reply

Shopping cart