Samsung SCX-5639FR Fuser Replacement Guide

 

Samsung SCX-5639FR Fuser Replacement Guide

Samsung SCX-5639FR Fuser Replacement Guide – Directly below you can obtain the illustrated fuser replacement directions. These fusers are graded at roughly 90,000 pages. Typical indications of worn fusers are wrinkles or indents on the pages, open, low, or high heat errors, and various sorts of print quality concerns. These fusers are actually simple to extract so it won’t do any harm to take a couple of minutes to take it out and inspect it if you are undergoing ailments you might think are associated to it.

Samsung JC91-01023A Fuser

$193.16  in stock
4 new from $126.47
Amazon.com
as of March 4, 2024 5:54 am

Features

  • This Is An O.E.M. Authorized Part
  • Fits With Various Samsung Brand Models
  • Oem Part # Jc91-01023A
  • Brand Name: Samsung

Samsung SCX-5639FR Fuser Replacement Guide

1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.

Samsung SCX-5639FR Fuser Replacement
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.

JC91-01023A Samsung ML-3312 OEM Fuser (GENUINE Samsung OEM)

$129.99  out of stock
Item condition: New
Ended: May 15, 08:25PST
eBay
as of March 4, 2024 5:54 am

M3370 fuser replacement 1of2

M3370 fuser replacement 1of2.

M3370 fuser replacement 2 of 2

M3370 fuser replacement 2 of 2.

We will be happy to hear your thoughts

Leave a reply

Shopping cart