Samsung SCX-4835FD Fuser Replacement Instructions
Samsung SCX-4835FD Fuser Replacement Instructions – Beneath you will acquire the illustrated fuser replacement guide. These fusers are ranked at roughly around 90,000 pages. General issues of old fusers are creases or indents on the pages, open, low, or high heat errors, and various sorts of print quality situations. These fusers are relatively straightforward to remove so it wouldn’t hurt to take a few minutes to take it out and explore it if you are experiencing conditions you may possibly think are associated to it.
Samsung JC91-01023A Fuser
$175.00 in stock
Features
- This Is An O.E.M. Authorized Part
- Fits With Various Samsung Brand Models
- Oem Part # Jc91-01023A
- Brand Name: Samsung
Samsung SCX-4835FD Fuser Replacement Instructions
1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.
JC91-01023A Samsung ML-3312 OEM Fuser (GENUINE Samsung OEM)
M3370 fuser replacement 1of2
M3370 fuser replacement 1of2.
M3370 fuser replacement 2 of 2
M3370 fuser replacement 2 of 2.