Samsung ProXpress M4030ND Fuser Replacement Tips
Samsung ProXpress M4030ND Fuser Replacement Tips – Beneath you can get the illustrated fuser replacement procedure. These fusers are graded at roughly around 90,000 pages. Universal warning signs of damaged fusers are creases or indents on the pages, open, low, or high heat errors, and various kinds of print quality concerns. These fusers are actually straightforward to detach so it should not do any harm to take a few minutes to take it out and evaluate it if you are coming across ailments you might think are connected to it.
Samsung ProXpress M4030ND Fuser Replacement Tips
1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.
Samsung JC91-01023A Fuser Unit – 110 / 120 Volt (Genuine) – $149.95Genuine Samsung ProXpress M4030ND JC91-01023A Fuser Unit – 110 / 120 Volt; Fuser Assembly / Unit – Genuine Samsung Fuser Assembly – Estimated Yield 90,000 pages |
JC91-01023A Samsung ML-3312 OEM Fuser (GENUINE Samsung OEM)
M3370 fuser replacement 1of2
M3370 fuser replacement 1of2.
M3370 fuser replacement 2 of 2
M3370 fuser replacement 2 of 2.