Samsung ML-3712DW, ML-3712ND Fuser Replacement Tips
Samsung ML-3712DW, ML-3712ND Fuser Replacement Tips – Below you can see the illustrated fuser replacement tips. These fusers are ranked at roughly around 90,000 pages. General warning signs of old fusers are creases or indents on the pages, open, low, or high heat errors, and various kinds of print quality problems. These fusers are extremely easy to extract so it shouldn’t hurt to take a few minutes to take it out and analyze it if you are observing troubles you may think are related to it.
1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.
JC91-01023A Samsung ML-3312 OEM Fuser (GENUINE Samsung OEM)
M3370 fuser replacement 1of2
M3370 fuser replacement 1of2.
M3370 fuser replacement 2 of 2
M3370 fuser replacement 2 of 2.