Lanier MP 3353 Feed Roller Kit Replacement AF030090, AF031090, AF032090
Lanier MP 3353 Feed Roller Kit Replacement – Beneath you can obtain the repair tips for the pick up, feed, and separation rollers for the cassette trays on this device. Within the PM tables, in the manual, it just advises to clean off them at the time of every maintenance cycle. At the same time, everybody knows they will finally have to be substituted.
Verifying Lanier MP 3353 Feed Roller Kit Replacement
Sight, feel, age, and copy count are circumstances I take into account whenever establishing replacing of the feed rollers. Do they have a gleam to them and is the texture drastically changed in spots or all together? And have they ever been upgraded and exactly how many pages have been ran through on them? In case they have a gloss they’re typically either becoming worn or old. If they have little texture or tread then again they are worn. Through the years the rubber gets dried up and hardens and might bring on ineffective feeding even though it appears to hold sufficient tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. However, if I’m touching one where they contain anything over 100,000 on them I’m in all likelihood prescribing upgraded.
Lanier MP 3353 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller
Advice : A portion of the directions shown below might not be important. Every once in awhile these service manual have a tendency to request parts removal that might be avoided. I probably would attempt to take out the separation roller on the side of the piece of equipment before you commit to tearing the back covers and duplex unit out.
Lanier MP 3353 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Lanier MP 3353 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Lanier MP 3353 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).
Lanier MP 3353 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.
Lanier MP 3353 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).
Lanier MP 3353 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR |
