Savin MP 3053 Feed Roller Kit Replacement AF030090, AF031090, AF032090
Savin MP 3053 Feed Roller Kit Replacement – Beneath you should locate the changing directions for the pick up, feed, and separation rollers for the cassette trays on this device. From the PM tables, in the manual, it just points out to wash these during the course of every routine service cycle. But, we understand they will finally have to be changed.
Verifying Savin MP 3053 Feed Roller Kit Replacement
Sight, feel, age, and copy count are concerns I take into account whenever deciding upon replacing of the feed rollers. Do they have a shine to them and is the feel worn away in places or all together? Or have they ever been swapped out and exactly how many pages have been ran through on them? When they have a shine they are normally either getting worn or old. If they have little texture or tread then again they are worn. Sooner or later the rubber gets dried up and hardens and may bring on unsatisfactory feeding although it appears to have a considerable amount of tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. However, if I’m in contact with one where they have anything over 100,000 on it I’m more than likely advising replacement.
Savin MP 3053 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller
Alert : A few directions down the page probably are not needed. Now and again these service manual are inclined to request parts removal which could be prevented. I would see if you can take out the separation roller on the side of the model before you commit to tearing the back covers and duplex unit out.
Savin MP 3053 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Savin MP 3053 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Savin MP 3053 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).
Savin MP 3053 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.
Savin MP 3053 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).
Savin MP 3053 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR |
