Lanier MP 3053 Feed Roller Kit Replacement AF030090, AF031090, AF032090

 

Lanier MP 3053 Feed Roller Kit Replacement AF030090, AF031090, AF032090

Lanier MP 3053 Feed Roller Kit Replacement – Beneath you can notice the replacement guide for the pick up, feed, and separation rollers for the cassette trays on this equipment. Within the PM tables, within the manual, it merely states to wash these in the time of each routine maintenance cycle. Yet, we recognize they’ll eventually are required to be swapped out.

Verifying Lanier MP 3053 Feed Roller Kit Replacement

Sight, feel, age, and copy count are aspects I take into consideration whenever deciding replacement of the feed rollers. Do they have a polish to them and is the feel drastically changed in sections or completely? Or have they ever been switched out and just how many pages are actually ran through on them? If they have a shine they’re generally either getting worn or old. If they have little texture or tread then again they are worn. As time goes by the rubber gets dried up and stiffens and will eventually lead to undesirable feeding although it appears to have sufficient tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. However, if I’m touching one where they’ve got anything over 100,000 on them I’m usually prescribing complete replacement.


Lanier MP 3053 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95

AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller

Advice : A portion of the details in this article might not be essential. Every once in awhile these service manual are inclined to necessitate items removal that may be ignored. I would personally attempt to remove the separation roller along the side of the machine prior to committing to tearing the back covers and duplex unit out.

Lanier MP 3053 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Lanier MP 3053 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Lanier MP 3053 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).

Lanier MP 3053 Cover Removal

Lanier MP 3053 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.

Lanier MP 3053 Duplex Unit Removal

Lanier MP 3053 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).

Lanier MP 3053 Feed Roller Kit Replacement

 


Lanier MP 3053 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR
We will be happy to hear your thoughts

Leave a reply

Shopping cart