Lanier MP 2852 Feed Roller Kit Replacement AF030090, AF031090, AF032090

 

Lanier MP 2852 Feed Roller Kit Replacement AF030090, AF031090, AF032090

Lanier MP 2852 Feed Roller Kit Replacement – Beneath you can encounter the repair instructions for the pick up, feed, and separation rollers for the cassette trays on this device. In the PM tables, in the manual, it simply points out to clean up these throughout each repair and maintenance cycle. At the same time, we understand they will eventually be required to be substituted.

Verifying Lanier MP 2852 Feed Roller Kit Replacement

Sight, feel, age, and copy count are aspects I take into consideration whenever choosing replacement of the feed rollers. Do they have a shine to them and is the texture decayed in spots or all together? And have they ever been changed out and how many pages happen to have been ran through on them? If they have a gleam they are typically either becoming worn or old. If they have little texture or tread then again they are worn. Down the road the rubber gets dried out and stiffens and may also bring about less than ideal feeding even though it appears to provide sufficient tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. Although, if I’m coming in contact with one where they have got anything over 100,000 on it I’m generally advocating complete replacement.


Lanier MP 2852 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95

AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller

Advice : A portion of the details below are probably not essential. Every once in awhile these service manual are inclined to necessitate parts removal which may be ignored. I might attempt to take out the separation roller on the side of the equipment prior to committing to removing the back covers and duplex unit out.

Lanier MP 2852 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Lanier MP 2852 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Lanier MP 2852 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).

Lanier MP 2852 Cover Removal

Lanier MP 2852 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.

Lanier MP 2852 Duplex Unit Removal

Lanier MP 2852 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).

Lanier MP 2852 Feed Roller Kit Replacement

 


Lanier MP 2852 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR
We will be happy to hear your thoughts

Leave a reply

Shopping cart