Ricoh MP 2553 Feed Roller Kit Replacement AF030090, AF031090, AF032090
Ricoh MP 2553 Feed Roller Kit Replacement – Below you should discover the installation details for the pick up, feed, and separation rollers for the cassette trays on this piece of equipment. Within the PM tables, in the manual, it merely suggests to clean up them in the course of each maintenance cycle. At the same time, we are all aware they’ll eventually have to be upgraded.
Verifying Ricoh MP 2553 Feed Roller Kit Replacement
Sight, feel, age, and copy count are aspects I take into account whenever choosing replacing of the feed rollers. Do they possess a gleam to them and is the texture drastically changed in sections or entirely? Or have they ever been substituted and just how many pages have been ran through on them? If they have a gloss they’re commonly either becoming worn or old. If they have little texture or tread then again they are worn. In the long term the rubber gets dried up and hardens and often will create undesirable feeding eventhough it appears to provide enough tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. Although, if I’m coming in contact with one where they have got anything over 100,000 on it I’m probably advising replacements.
Ricoh MP 2553 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller
Advice : A few selected details in this article might not be essential. Once in a while these service manual are inclined to ask for components removal that could be avoided. I might attempt to remove the separation roller along the side of the equipment prior to committing to removing the back covers and duplex unit out.
Ricoh MP 2553 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Ricoh MP 2553 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Ricoh MP 2553 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).
Ricoh MP 2553 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.
Ricoh MP 2553 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).
Ricoh MP 2553 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR |
