Lanier MP 2553 Feed Roller Kit Replacement AF030090, AF031090, AF032090
Lanier MP 2553 Feed Roller Kit Replacement – Beneath you can acquire the changing tips for the pick up, feed, and separation rollers for the cassette trays on this machine. From the PM tables, in the manual, it just advises to clean them over the course of every service cycle. But, we understand they will inevitably be required to be changed out.
Verifying Lanier MP 2553 Feed Roller Kit Replacement
Sight, feel, age, and copy count are aspects I take into consideration when figuring out replacing of the feed rollers. Do they possess a shine to them and is the texture worn away in places or overall? And have they ever been changed out and exactly how many pages are actually ran through on them? When they have a gloss they are often either getting worn or old. If they have little texture or tread then again they are worn. In the long term the rubber gets dried out and stiffens and might produce below average feeding although it appears to possess a large amount of tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. However, if I’m touching one where they have anything over 100,000 on them I’m likely advocating replacements.
Lanier MP 2553 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller
Advice : A number of the instructions in this article are probably not needed. In certain cases these service manual have a tendency to desire parts removal that could be avoided. I’d personally see if you can remove the separation roller on the side of the product prior to committing to removing the back covers and duplex unit out.
Lanier MP 2553 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Lanier MP 2553 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Lanier MP 2553 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).
Lanier MP 2553 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.
Lanier MP 2553 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).
Lanier MP 2553 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR |
