Lanier MP 2352 Feed Roller Kit Replacement AF030090, AF031090, AF032090

 

Lanier MP 2352 Feed Roller Kit Replacement AF030090, AF031090, AF032090

Lanier MP 2352 Feed Roller Kit Replacement – Below you will view the repair directions for the pick up, feed, and separation rollers for the cassette trays on this model. From the PM tables, in the manual, it only advises to clean these through every regular maintenance cycle. But the truth is, everyone knows they will finally require to be replaced.

Verifying Lanier MP 2352 Feed Roller Kit Replacement

Sight, feel, age, and copy count are aspects I take into consideration when diagnosing replacement of the feed rollers. Do they possess a polish to them and is the feel decayed in places or entirely? And have they ever been switched out and exactly how many pages are actually ran through on them? If they’ve got a gleam they’re typically either becoming worn or old. If they have little texture or tread then again they are worn. After some time the rubber gets dried up and stiffens and might induce less than ideal feeding although it appears to possess a considerable amount of tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. Although, if I’m coming in contact with one where they’ve anything over 100,000 on them I’m in all likelihood proposing upgraded.


Lanier MP 2352 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95

AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller

Advice : A few selected directions down the page may not be crucial. Once in a while these service manual tend to desire parts removal which can be ignored. I probably would try to take out the separation roller along the side of the unit before you commit to removing the back covers and duplex unit out.

Lanier MP 2352 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Lanier MP 2352 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Lanier MP 2352 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).

Lanier MP 2352 Cover Removal

Lanier MP 2352 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.

Lanier MP 2352 Duplex Unit Removal

Lanier MP 2352 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).

Lanier MP 2352 Feed Roller Kit Replacement

 


Lanier MP 2352 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR
We will be happy to hear your thoughts

Leave a reply

Shopping cart