Savin C2525 Magenta Developer Replacement B230-9670, B2309670

 

Savin C2525 Magenta Developer Replacement B230-9670, B2309670

Savin C2525 Magenta Developer Replacement – One device which generally can get forgotten while working with print quality can be the developer. Used developer can potentially lead to washed out prints, tone voids, and numerous other complications. The developer wears out throughout a extensive length of time which means many users never view the decrease in print quality till it gets unquestionably low quality.

Because of the fact used developer routinely looks like low toner users often tend to swap the toner cartridge for starters. Once individuals observe that fails to fix the situation they quite often phone for assistance. Beneath you will find the developer replacement assistance to help reestablish the fresh dazzling colors you demand while working with one of these pricey machines.


Ricoh B230-9670 Magenta Developer (Genuine) – $61.95

B230-9670, B2309670

Savin C2525 Magenta Developer Replacement

The new drum unit has a front cover and a front joint. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first.
And use them for reassembling the new drum unit and development unit.

Entering SP Mode
1. Press the “Clear Mode” key.
2. Use keypad to enter “107”.
3. Hold down “Clear/Stop”  for 3 seconds at least.
4. Enter the Service Mode.
If you install a new drum unit, set SP 3902-xxx to “1”.
Black: 3902-009
Yellow: 3902-010
Cyan: 3902-011
Magenta: 3902-012
If you do this, then the machine will reset the PM counter for the drum unit automatically, after you turn the power on again.
Turn the machine power off.

1-2. PCU ( “PCU”)
3. Front cover [A] ( x 2)
4. Do not touch the bearing [B] after removing the front cover. The bearing is properly applied with lubricant.
Note: Remove the toner duct [G] first to avoid breaking it during this procedure.
5. Remove the bushing [C] of the development roller at the rear of the PCU ( x 1).
6. Remove the front joint [D] ( x 1, x 1).
The front joint [D] is firmly set. Remove it with a watchmaker’s or jeweller’s screwdriver.
Drum unit [E] and Development Unit [F] [G]

Savin C2525 Magenta Developer Replacement

When the development unit is removed from the drum unit, clean the entrance mylar [G] with a vacuum.
If you change the development unit, do the ACC procedure.

3902 Turns the new unit detection flag for each PM unit on or off.
The use of these counters is explained in the PM section and in the relevant parts of section 3 (Replacement and Adjustment).

Entering SP Mode
1. Press the “Clear Mode” key.
2. Use keypad to enter “107”.
3. Hold down “Clear/Stop”  for 3 seconds at least.
4. Enter the Service Mode.

If you install a single new developer or developer unit only reset that particular developer or unit, set SP 3902-xxx to “1”.
001 Development Unit: Bk *ENG
002 Development Unit: Y *ENG
003 Development Unit: C *ENG
004 Development Unit: M *ENG
005 Developer: Bk *ENG
006 Developer: Y *ENG
007 Developer: C *ENG
008 Developer: M *ENG
A. Turn the machine power off.
B. Development unit ( “Drum Unit and Development Unit”)
7. Hopper cover [A] (hook x 3)
8. Shake a bag of developer and pour it into the development hopper [B].
9. Reattach the hopper cover (hook x 3)
10. Turn the machine power on. The machine initializes the developer and resets the PM counter for the developer. (For details of the developer initialization result, see “Developer Initialization Result” in the “Troubleshooting” chapter.
8. Do the ACC procedure.


Ricoh B230-9670 Magenta Developer (Genuine) – $61.95

Genuine Ricoh B230-9670 Magenta Developer; Developer – Genuine Ricoh Brand – Replace every 160,000 pages; Mfr PNs: Ricoh B2309670, Savin B230-9670, B2309670, Gestetner B230-9670, B2309670, Lanier B230-9670, B2309670; Color: Magenta

We will be happy to hear your thoughts

Leave a reply

Shopping cart