Ricoh Aficio MP C4500 Yellow Drum Replacement B2242027, B2232027, B2232043, B2232045, B2232246

 

Ricoh Aficio MP C4500 Yellow Drum Replacement B2242027, B2232027, B2232043, B2232045, B2232246

Ricoh Aficio MP C4500 Yellow Drum Replacement – What follows is the instructions for the drum and developer replacement. Commonly when you begin experiencing color streaks or color back grounding it’s a warning sign that the charge grid and cleaning blade are beginning to go bad. A number of vendors market PM solutions to restructure the drum units but with the price these being fairly low-priced, I would incline in the direction of actually replacing the whole unit seeing that it involves small technical skill unlike rejuvenating it which can sometimes become challenging and dirty.


Ricoh B224-2027 Color Drum Unit (Genuine) – $569.95

B224-2027, B2242027, B223-2027, B223-2043, B223-2245, B2232027, B2232043, B2232045, B2232246

Ricoh Aficio MP C4500 Yellow Drum Replacement and Developer Unit

The new drum unit has a front cover and a front joint. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first.
And use them for reassembling the new drum unit and development unit.
If you install a new drum unit, set SP 3902-xxx to “1”.
Black: 3902-009
Yellow: 3902-010
Cyan: 3902-011
Magenta: 3902-012
If you do this, then the machine will reset the PM counter for the drum unit automatically, after you turn the power on again.
Turn the machine power off.
1-2. PCU ( “PCU”)
3. Front cover [A] ( x 2)
4. Do not touch the bearing [B] after removing the front cover. The bearing is properly applied with lubricant.
Note: Remove the toner duct [G] first to avoid breaking it during this procedure.
5. Remove the bushing [C] of the development roller at the rear of the PCU ( x 1).
6. Remove the front joint [D] ( x 1, x 1).
The front joint [D] is firmly set. Remove it with a watchmaker’s or jeweller’s screwdriver.
Drum unit [E] and Development Unit [F] [G]
Ricoh Aficio MP C4500 Yellow Drum Replacement
When the development unit is removed from the drum unit, clean the entrance mylar [G] with a vacuum.
If you change the development unit, do the ACC procedure.
A. Turn the machine power off.
B. Development unit ( “Drum Unit and Development Unit”)
7. Hopper cover [A] (hook x 3)
8. Shake a bag of developer and pour it into the development hopper [B].
9. Reattach the hopper cover (hook x 3)
10. Turn the machine power on. The machine initializes the developer and resets the PM counter for the developer. (For details of the developer initialization result, see “Developer Initialization Result” in the “Troubleshooting” chapter.
8. Do the ACC procedure.


Ricoh B224-2027 Color Drum Unit (Genuine) – $569.95

Retail Price: $949.95
You Save: $380.00

We will be happy to hear your thoughts

Leave a reply

Shopping cart