Ricoh Aficio MP C2000 Cyan Drum Replacement B2242027, B2232027, B2232043, B2232045, B2232246
Ricoh Aficio MP C2000 Cyan Drum Replacement B2242027, B2232027, B2232043, B2232045, B2232246
Ricoh Aficio MP C2000 Cyan Drum Replacement – Just below are the directions for the drum and developer restoration. Generally when you start noticing color streaks or color back grounding it is a warning that the charge grid and cleaning blade are beginning to go bad. Certain providers offer PM kits to renew the drum units but with the value of these currently being somewhat low-priced, I’d personally aim towards just exchanging unit because it normally requires small technical ability in contrast to repairing it which might become advanced and messy.
Ricoh B224-2027 Color Drum Unit (Genuine) – $569.95
B224-2027, B2242027, B223-2027, B223-2043, B223-2245, B2232027, B2232043, B2232045, B2232246
Ricoh Aficio MP C2000 Cyan Drum Replacement and Developer Unit
The new drum unit has a front cover and a front joint. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first.
And use them for reassembling the new drum unit and development unit.
If you install a new drum unit, set SP 3902-xxx to “1”.
Black: 3902-009
Yellow: 3902-010
Cyan: 3902-011
Magenta: 3902-012
If you do this, then the machine will reset the PM counter for the drum unit automatically, after you turn the power on again.
Turn the machine power off.
1-2. PCU ( “PCU”)
3. Front cover [A] ( x 2)
4. Do not touch the bearing [B] after removing the front cover. The bearing is properly applied with lubricant.
Note: Remove the toner duct [G] first to avoid breaking it during this procedure.
5. Remove the bushing [C] of the development roller at the rear of the PCU ( x 1).
6. Remove the front joint [D] ( x 1, x 1).
The front joint [D] is firmly set. Remove it with a watchmaker’s or jeweller’s screwdriver.
Drum unit [E] and Development Unit [F] [G]
When the development unit is removed from the drum unit, clean the entrance mylar [G] with a vacuum.
If you change the development unit, do the ACC procedure.
A. Turn the machine power off.
B. Development unit ( “Drum Unit and Development Unit”)
7. Hopper cover [A] (hook x 3)
8. Shake a bag of developer and pour it into the development hopper [B].
9. Reattach the hopper cover (hook x 3)
10. Turn the machine power on. The machine initializes the developer and resets the PM counter for the developer. (For details of the developer initialization result, see “Developer Initialization Result” in the “Troubleshooting” chapter.
8. Do the ACC procedure.
Ricoh B224-2027 Color Drum Unit (Genuine) – $569.95
Retail Price: $949.95
You Save: $380.00
