Savin SF3760NF, SF3760 PCU Drum Replacement Method
Below you will find the Savin SF3760NF, SF3760 PCU Drum Replacement Advice. The good news is that this particular PCU is quite affordable. Simultaneously, it incorporates almost all the image development segments. That’s why, your not stuck buying a many parts. Which means that, if you have got an image trouble, you do not throw away a great deal of time questioning which part is causing the problem if you don’t have a great deal of experience trouble-shooting equipment.
These Drums are stated at more or less 45,000 pages. In general you should get a Replace PCU message when it is time to replace the unit.
Savin SF3760 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.
1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.
2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.
3. Store the PCU in a cool dry place.
4. Do not expose the drum to corrosive gases (ammonia, etc.).
5. Do not shake a used PCU, as this may cause toner and developer to spill out.
PCU Drum Removal Technique
1. Open the right door.
NOTE: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.
2. Open the front door.
3. Remove the toner bottle holder or THM.
;”>Notice: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.
4. Detach the connector [A] and pull out the PCU [B].
;”>Message: 1) After putting in the latest PCU, be certain to get rid of the Styrofoam element and to pull off the two tags.
3) Eliminate the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.
2) The machine will actually detect the brand new PCU and commence with toner initialization.
You might not have to turn off the PM Alert Message. The PM level could possibly be set to 45,000. Then again, a lot of people have turned them off nowadays or wouldn’t have them placed this low.
After finishing PM, get rid of the PM counter as follows.
1. Obtain access to SP mode 7-804.
2. Hold down the Original Type key and press the OK key (or ! key) to totally reset the counter. If the reset is productive, the control panel exhibits “Action completed.” If the reset is rejected, the display depicts “Error!!!”
Savin SF3760 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
