Gestetner F550, F540, F530 PCU Drum Replacement Routine
On the next paragraphs there is the Gestetner F550, F540, F530 PCU Drum Replacement Pointers. The good news is that the PCU is considerably reasonable. In addition, it includes most of the image creation equipment. That being said, your not cornered purchasing a good amount of parts. Which means that, if you may have an image malfunction, you do not use up significant amounts of time speculating which section is generating the problem if you don’t have a great deal of dealings problem solving machines.
These Drums are detailed at in the vicinity of 45,000 pages. Normally you might get a Replace PCU message when it is time to replace the unit.
Gestetner F540 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.
1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.
2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.
3. Store the PCU in a cool dry place.
4. Do not expose the drum to corrosive gases (ammonia, etc.).
5. Do not shake a used PCU, as this may cause toner and developer to spill out.
Gestetner F550, F540, F530 PCU Drum Removal Plan
1. Open the right door.
Observe: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.
2. Open the front door.
3. Remove the toner bottle holder or THM.
;”>Please note: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.
4. Detach the connector [A] and pull out the PCU [B].
;”>Bear in mind: 1) After the installation of the new PCU, be sure to remove the Styrofoam piece and to pull off the two tags.
3) Take the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.
2) The machine will conveniently detect the brand-new PCU and commence with toner initialization.
You might not have to switch off the PM Alert Message. The PM level may possibly be predetermined to 45,000. However, a lot of people have turned them off these days or would not have them specified this low.
After performing PM, eliminate the PM counter as follows.
1. Acquire SP mode 7-804.
2. Hold down the Original Type key and press the OK key (or ! key) to totally reset the counter. If the adjust is effective, the control panel exhibits “Action completed.” If the adjustment is rejected, the control panel details “Error!!!”
Gestetner F540 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
