Gestetner F104L, F104 PCU Drum Replacement Procedure TYPE 1013

 

Gestetner F104L, F104 PCU Drum Replacement Procedure

Listed below you will find the Gestetner F104L, F104 PCU Drum Replacement Info. The good news is that the PCU is somewhat economical. Moreover, it also contains almost all of the image creation devices. As a result, your not trapped changing a good deal of devices. Fot that reason, if you have got an image trouble, you do not invest a considerable amount of time questioning which section is making the problem if you don’t have a substantial amount of expertise problem solving equipment.

These Drums are stated at in the vicinity of 45,000 pages. Often you will get a Replace PCU message when it is time to replace the unit.


Gestetner F104 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.

1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.

2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.

3. Store the PCU in a cool dry place.

4. Do not expose the drum to corrosive gases (ammonia, etc.).

5. Do not shake a used PCU, as this may cause toner and developer to spill out.

Gestetner F104L, F104 PCU Drum Removal Techniques

1. Open the right door.

Keep in mind: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.

2. Open the front door.

3. Remove the toner bottle holder or THM.

;”>Take note: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.

4. Detach the connector [A] and pull out the PCU [B].

;”>Please note: 1) After installing the all new PCU, be certain to remove the Styrofoam section and to pull off the two tags.

3) Remove the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.

2) The machine will actually detect the new-found PCU and begin toner initialization.

Gestetner F104L, F104 PCU Drum Replacement

You may not have to flip off the PM Alert Message. The PM level might be defined to 45,000. Although, a lot of people have switched them off at this stage or might not have them set in place this low.

After carrying out PM, eliminate the PM counter as follows.

1. Connect to SP mode 7-804.

2. Hold down the Original Type key and push the OK key (or ! key) to totally reset the counter. If the reset is productive, the screen exhibits “Action completed.” If the adjustment does not work properly, the display indicates “Error!!!”


Gestetner F104 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

We will be happy to hear your thoughts

Leave a reply

Shopping cart