Kyocera KM-2540 C6120 Error Code Maintenance Assistance
The Kyocera KM-2540 C6120 Error Code happens when the fuser states a excessive temperature reading. Several situations could potentially cause this issue. So in this article you will discover some repair tips for this malfunction as well as url links to order a replacement fuser as well as at the bottom of the page you will find a link to the illustrated fusing unit replacement details.
Please note : fuser Associated Error Codes can cause the model to fail to work until the code is reset in Maintenance Mode. Below is a link to the details teaching you how to reset the code with the maintenance menu.
Kyocera KM-2540 Fuser Error Reset Procedure – 302K593060
Service Guide Instruction for your Kyocera KM-2540 C6120 Error Code
Abnormally significant fuser thermistor edge temp
Fuser thermistor one is observed 230°C/446°F or higher for 40 ms.
1. Unit installation defectiveness on fuser thermistor 1.
Examine the mounting condition of the fuser thermistor 1. If any issue is found, remedy it.
2. Defective fuser thermistor 1.
Replace the fuser thermistor 1.
3. Defective engine PWB.
Replace the engine PWB and check for correct operation.
These particular fusers tend to be fairly affordable. Like a number of pieces located on the Kyocera devices, lots of instances its more economical to just replace the entire piece or even maintenance kit. Therefore, if you are having issues with the fuser, I would likely just suggest saving some time and money and buy a whole replacement fuser unit. Below, you will discover a hyperlink to the replacement instructions in addition to a link to order in your replacement fuser assembly.
Kyocera KM-2540 Fuser Replacement Procedure
Kyocera code c6000
Kyocera code c6020 Kyocera code c6050 code Kyocera KM1620 Kyocera KM1635 Kyocera KM1650 Kyocera KM2020 Kyocera KM2030 Kyocera KM2035 Kyocera KM2050 Kyocera KM2530 Kyocera KM2540 Kyocera...
