CopyStar CS-2560 C6020 Error Code Repair Guidance

 

CopyStar CS-2560 C6020 Error Code Repair Guidance

The CopyStar CS-2560 C6020 Error Code develops when the fusing assembly reports a significant temperature reading. A large amount of things might cause this issue. So in this post you will discover some servicing advice for this malfunction in conjunction with links to acquire a new fuser unit and also at the bottom of the blog post there is also a link to the illustrated fuser replacement information.

CopyStar CS-2560 C6020 Error Code


Copystar CS2560 Fuser Unit – 120 Volt (Genuine) – $169.95

from: Precision Roller

Please note : fuser assembly Related Error Codes could potentially cause the piece of equipment to fail to operate till the code is reset in Maintenance Mode. Down below is a hyperlink to the guide on methods to reset the code by way of the maintenance menu.

CopyStar CS-2560 Fuser Error Reset Procedure – 302K593060

Service Manual Assistance for the CopyStar CS-2560 C6020 Error Code

Unusually extremely high fuser thermistor center temperature
fusing unit thermistor 2 is detected 230°C/ 446°F and up for Forty milliseconds.

1. Installment defectiveness on fuser assembly thermistor 2.
Check out the mounting condition of the fuser thermistor 2. If any sort of issue is uncovered, remedy a repair.

2. Malfunctioning fusing unit thermistor Two.
Switch out the fuser assembly thermistor 2.

3. Defective engine PWB.
Switch out the engine PWB and validate for ideal utilization.

A lot of these fuser are considerably low-cost. Like many items within the Kyocera models, a considerable amount of times its less costly to merely switch out the whole part or maintenance kit. For this reason, if you really are experiencing difficulity while using the fuser, I would most likely simply often recommend saving some time and money and obtain a whole replacement fusing assembly. Following, you will find a url to the replacement instructions including a connection to purchase in your complete replacement fuser assembly.

CopyStar CS-2560 Fuser Replacement Procedure


Copystar CS2560 Fuser Unit – 120 Volt (Genuine) – $169.95

Genuine 302K593060 Fuser Unit – 120 Volt for Copystar CS2560; Fuser Assembly / Unit – Genuine Kyocera Fuser Assembly; Copystar 302K593060 / 302H093030 / 2H093030
We will be happy to hear your thoughts

Leave a reply

Shopping cart