Copystar CS-2050 C6000 Error Code Service Guidance

 

Copystar CS-2050 C6000 Error Code Service Guidance

I have a variety of these in this area and I do not think I’ve at any time before observed the Copystar CS-2050 C6000 Error code on one of these kind of units. However, these devices are getting old and if one has had the exact same fuser unit in there ever since you have had it, you may be seeing these kinds of errors. Below you will find the service information recommendation for this specific error as well as a url to shop for a fresh fuser unit and in addition at the completion of the article, a hyperlink on the fusing assembly replacement directions

Copystar CS-2050 C6000 Error Code


Copystar CS2050 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

from: Precision Roller

Service Manual Advice for the Copystar CS-2050 C6000 Error Code 

C6000 Broken fixing heater wire In fixing warm-up, the time to reach 50°C/122°F exceeds 13.5 s, the time to reach 100°C/212°F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilization exceeds 24 s.

1. Poor contact in the thermistor connector terminals.
Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.

2. Fixing thermistor installed incorrectly.
Check and reinstall if necessary.

3. Fixing thermostat triggered.
Check for continuity. If none, replace the fixing thermostat.

4. Fixing heater M or S installed incorrectly.
Check and reinstall if necessary.

5. Broken fixing heater M or S wire.
Check for continuity. If none, replace the heater lamp.

Genuinely, Acquiring these parts specifically is either difficult to acquire or not worth changing. If your going through difficulties using the fuser assembly and you decide it’s time to start changing parts then it is potentially just time to replace the entire fusing unit due to the pricing. Down below you will notice a link to get in a replacement fuser unit and a link through to the illustrated fuser unit replacement details.

Copystar CS-2050 Fuser Replacement Procedure – – FK-410, 302C993059


Copystar CS2050 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

Genuine 302C993059 Fuser Unit – 110 / 120 Volt for Copystar CS2050; Fuser Assembly / Unit – Genuine Kyocera Mita Fuser Assembly – Estimated Yield 300,000 pages; Copystar 302C993059 / 302C993058 / 302C993057 / 302C993056 / 2C993055 / 2C993053 / 2C993052 / 2C993051 / 2C993050
We will be happy to hear your thoughts

Leave a reply

Shopping cart