Copystar CS-1650 C6000 Error Code Repair Useful information
I have a few of these out in the field and I don’t believe I’ve actually ever witnessed the Copystar CS-1650 C6000 Error code on one of these particular machines. However, these units are getting dated and whenever you have had the exact same fusing assembly in it since you’ve had it, you could very well be seeing these kinds of errors. Below you can find the service manual recommendation for this particular error and additionally a web page link to purchase a newer fusing unit and also at the completion of this article, a weblink for the fusing assembly replacement information.
Copystar CS1650 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95
from: Precision Roller
Service Manual Advice for the Copystar CS-1650 C6000 Error CodeÂ
C6000 Broken fixing heater wire In fixing warm-up, the time to reach 50°C/122°F exceeds 13.5 s, the time to reach 100°C/212°F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilization exceeds 24 s.
1. Poor contact in the thermistor connector terminals.
Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
2. Fixing thermistor installed incorrectly.
Check and reinstall if necessary.
3. Fixing thermostat triggered.
Check for continuity. If none, replace the fixing thermostat.
4. Fixing heater M or S installed incorrectly.
Check and reinstall if necessary.
5. Broken fixing heater M or S wire.
Check for continuity. If none, replace the heater lamp.
Frankly, Ordering these parts separately is often hard to find or otherwise not worth repairing. If your enduring worries using the fusing assembly and you decide it’s time to start changing items then it’s generally just time to remove and replace the whole fusing unit due to the value. Down below you will discover a link to buy a replacement fusing unit and a url to the illustrated fuser assembly replacement assistance.
Copystar CS-1650 Fuser Replacement Procedure – – FK-410, 302C993059
Copystar CS1650 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95 Genuine 302C993059 Fuser Unit – 110 / 120 Volt for Copystar CS1650; Fuser Assembly / Unit – Genuine Kyocera Mita Fuser Assembly – Estimated Yield 300,000 pages; Copystar 302C993059 / 302C993058 / 302C993057 / 302C993056 / 2C993055 / 2C993053 / 2C993052 / 2C993051 / 2C993050 |
