Lanier LD127 Laser Motor Replacment directions

 

Lanier LD127 Laser Motor Replacment directions

Listed below you can discover the Lanier LD127 Laser motor replacement instructions. The SC 320 Error is the typical source to be compelled to swap or remove this section. Noise are often a different issue. As time passes, the lubrication will wear lessen and you’re likely to acquire a loud sound through these items and they get into gear to printing rate. Normally, my first step is generally to remove the part, consider taking the motor apart, clean up and lubricate the motor bushings and polygon motor shaft, and ensure if that functions.

Lanier LD127 Laser Motor Replacement Procedure

?WARNING

Turn off the main power switch and unplug the machine before attempting this routine. Laser beam can seriously can damage your eyes.

1. Take off the optional finisher/bridge unit, and either the tray for the optional 1-bin tray unit or optional shift tray, if these units have been installed.

2. Strip away the upper front cover [A] (1 screw, 1 hook).

3. Extract the front cover [B] (2 pins).

4. Detach the inner cover [C] (5 screws).

5. Extract the copy tray [D] (1 hook [E]).

6. Take off the toner bottle holder [F].

Note : If your just changing or want to obtain the motor you probably will not need to remove the whole item. Professionally, I never have. Moreover, it might be responsible for having to do Step 8.

7. Remove the laser unit [G] (2 screws, 2 connectors).

8. After reassembling the equipment, execute the scanner and printer copy adjustments.

Take note : I’m not preparing to put this method in here because I am not clearly certain that it’s important for this repair service. I’m certain, I for no reason have had to do it. Plus, most of the people who seem to be still using these equipment ordinarily are not highly disturbed if print quality may be depleted in general.

Lanier LD127 Laser Motor Replacement




We will be happy to hear your thoughts

Leave a reply

Shopping cart