Brother HL-2270DW Fuser Replacement Procedure LY2487001

 

Brother HL-2270DW Fuser Replacement Procedure LY2487001

Below you will find the illustrated Brother HL-2270DW Fuser Replacement Procedure. These fuser tend to last anywhere between 50,000 and 80,000 prints. Rarely do I every come across one of these machines that has over 80,000 and doesn’t have some sort of issues related to the fuser. Also, you will find links to purchase a replacement fuser and at the very end of the article, I have provided a few links to replacement models.

- 18%
LY2487001 Fuser Unit For Brother DCP7065DN MFC7360N MFC7460DN MFC7860DW
Amazon.com
LY2487001 Fuser Unit For Brother DCP7065DN MFC7360N MFC7460DN MFC7860DW
$110.47  $89.96
Last updated on July 11, 2019 12:17 pm

Brother LY2487001 Fuser Unit DCP-7060D, HL-2220, HL-2240D, HL2270DN, Fax 2840, MFC-7240, 7360, 7460DN
1. Brother HL-2270DW Back Cover
(1) Open the back cover.
(2) Push the both side ribs of the back cover to the direction of the arrow 2, and release the boss of the outer chute ASSY.
(3) Release the boss of the main body while pulling the back cover to the direction of the arrow 3a, and remove the back cover.

Assembling Note:
• When assembling the back cover, close the back cover with aligning the boss of the outer chute ASSY with the groove of both side ribs of the back cover.

2. Brother HL-2270DW Outer Chute ASSY
(1) Pull the outer chute ASSY to the direction of the 1a, and release the boss of the outer chute ASSY from the main frame L ASSY, and remove the outer chute ASSY.

3. Brother HL-2270DW Fuser Cover
(1) Hold the knobs on the fuser cover, and pull down this to your side.
(2) Release the boss of the main body while pulling the fuser cover to the direction of the arrow 2, and remove fuser cover.

Assembling Note:
• When assembling the fuser cover, Check that only one of roller does not lift up. Check the position of the anti-curl levers

4. Brother HL-2270DW Inner Chute ASSY, Eject Pinch Roller R ASSY and Eject Pinch Roller L ASSY
(1) Pull down both side green envelope levers of the fuser unit.
(2) Remove the two taptite bind B M4x12 screws to remove the inner chute ASSY

Assembling Note:
• When assembling the inner chute ASSY, align the hooks of the inner chute ASSY with the positioning holes of the joint cover ASSY.
• Pull up both side green levers of the fuser unit after assembling the inner chute ASSY.

5. Brother HL-2270DW Side Cover R
(1) Remove the taptite bind B M4x12 screw.
(2) Release the hooks in the order of 1a, 1b and 1c, and remove the side cover R.

6-9. Brother HL-2270DW Fuser Replacement

(1) Release the harness of the fuser unit from the guides of the main frame R ASSY.
(2) Disconnect the connector of the low voltage power supply PCB ASSY while pushing the hook of the connector of the fuser unit
(3) Put the connector of the fuser unit through the hole of the main frame R ASSY
(4) Disconnect the connectors of the center thermistor harness ASSY and the side thermistor harness ASSY from the paper eject sensor PCB ASSY.
(5) Release the harnesses of the center thermistor harness ASSY and the side thermistor harness ASSY from the guides of the main frame L ASSY.
(6) Remove the two taptite pan B M4x14 screws to remove the fuser unit.
Note:
• Do not apply a physical impact or vibration to the fuser unit.
• Do not touch the roller and electrodes as shown in the figure below to prevent breakage of the fuser unit.

Brother HL-2270DW Fuser Replacement

Alright, that’s it. Not one of your easier replacement jobs but that is the typical story if these smaller machines. Below you will find a link to the replacement instructions along with some replacement machine options.
Brother LY2487001 Fuser Unit DCP-7060D, HL-2220, HL-2240D, HL2270DN, Fax 2840, MFC-7240, 7360, 7460DN

LY2487001 Fuser Unit For Brother DCP7065DN MFC7360N MFC7460DN MFC7860DW

$110.47
$89.96  in stock
3 new from $89.96
Buy Now
Amazon.com
as of July 11, 2019 12:17 pm

Features

  • LY2487001 Fuser Unit For Brother DCP7065DN MFC7360N MFC7460DN MFC7860DW

LY2487001 Fuser Unit For Brother DCP7065DN MFC7360N MFC7460DN MFC7860DW

Brother LY2487001 Fuser Unit DCP-7060D, HL-2220, HL-2240D, HL2270DN, Fax 2840, MFC-7240, 7360, 7460DN

$149.78  in stock
1 new from $149.78
1 used from $ 99.88
Buy Now
Amazon.com
as of July 11, 2019 12:17 pm

Features

  • This product is by Brother

NEW OPEN BOX BROTHER FUSER

Lexmark 35S0260 MS410 MS415DN Laser Printer, Monochrome, 1200x1200 Dpi Plain Paper Print, Desktop

Price: $948.88

3.3 out of 5 stars (29 customer reviews)

4 used & new available from $299.99


Brother MFCL2740DW Wireless Monochrome Printer with Scanner, Copier and Fax, Amazon Dash Replenishment Enabled

Price: $228.01

4.0 out of 5 stars (1461 customer reviews)

30 used & new available from $228.01


Brother FAX4100E IntelliFax Plain Paper Laser Fax/Copier

Price: $243.65

4.0 out of 5 stars (259 customer reviews)

110 used & new available from $54.00


1 Comment
  1. What are the symptons of this piece going bad?

     

    Leave a reply