Dell 2355dn Pick Up Roller Replacement

 

Dell 2355dn Pick Up Roller Replacement Procedure UG594

Below you will find the Dell 2355dn Pick Up Roller Replacement Procedure UG594. They rate these rollers at around 150,000 which is a bunch of B.S. Most the ones I see, start to have issues around 50,000. Now, you can rotate the feed rubber of the feed roller and get some more life out of it, but if your going to be ordering additional parts I would just replace it. Age is also another factor to consider. It seems that after 10 years the rubber starts to crack and fall apart, if you have an older model, it still might not hurt to replace it, even if it has a low page count.

Jam 0 is the most common result of a worn out pick up roller. In some cases you can also get Jam 1’s. Basically, if your customer or fellow employees are complaining about the paper not getting out of the tray, but if they open and shut the door it sometimes picks up, it’s most likely your roller.


Dell 2355dn Cassette Pickup Roller (Genuine)

Dell 2355dn Pick Up Roller Replacement Procedure

1. Take out the Cassette.
2. To remove the Pick Up Roller Assembly, first lift the notch attached to the
Pick Up Roller Assembly, red circle, from the Shaft, then slide the Pick Up Roller Assembly from left to right and it will be released completely, as shown below.

Note : The picture below might not be an exact match to your machine but the removal procedure should be identical.

Dell 2355dn Pick Up Roller Replacement

There you have it. This job is pretty easy and has minimal cost and will take care of a lot of your tray jam issues.

Click on the link below to order in your Dell 2355dn Pick Up Roller Replacement Parts


Dell 2355dn Cassette Pickup Roller (Genuine) – $14.95

Genuine UG594 Cassette Pickup Roller for Dell 2355dn; Paper Feed Component – Genuine Samsung Part




We will be happy to hear your thoughts

Leave a reply

Shopping cart