Samsung SCX-4826FN ADF Roller Replacement Procedure JC97-01962A, JC97-01962C, B2739530
Further down, there is the Samsung SCX-4826FN ADF Roller Replacement Technique. As we move more and more to scanning items, I’ve observed and incline with the amount of paperwork being fed through the use of document feeders. Differing makes put diverse maintenance rates for the roller and separation pad. I’d say if the roller is between 50,000 and 75,000 it in all probability should be changed out additionally, the separation pad rubber is rated between 25,000 and 50,000. On this page, you will locate the illustrated replacement tutorials.
Signs and symptoms of old rollers are inadequate pick-up. Nearly all people complain that they need to more or less urge the paperwork along at first to get it started feeding within the unit and irregular jamming will happen repeatedly. Indicators of a worn out pad are typically numerous feeding or some like to call it, double feeding. If you see signs and symptoms of either one of the aforementioned difficulties your best bet is to switch out these parts. In many instances when your experiencing difficulty feeding, cleansing the rollers off slightly should get it back functioning yet again for a short amount of time until you can get the materials ordered. Multiple feeding is often times more irritating and is difficult to get it operating in the correct manner prior to the separation pad is exchanged.
Samsung SCX-4826FN ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Samsung SCX-4826FN ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Samsung SCX-4826FN ADF Roller Replacement and Separation Pad Replacement Parts
Samsung JC97-01962A Mea Unit-Pickup Dell
Features
- This is an O.E.M. Authorized part
- Fits with various Samsung brand models
- Oem part # JC97-01962A
