Samsung SCX-4824FN ADF Roller Replacement Procedure JC97-01962A, JC97-01962C, B2739530
Down the page, you will find the Samsung SCX-4824FN ADF Roller Replacement Remedy. As we move more and more in direction of scanning documents, I’ve encountered and incline with the levels of pages being fed within document feeders. Differing companies specify completely different maintenance values relating to the roller and separation pad. I’d believe that however, if the roller is between 50,000 and 75,000 it potentially should be repaired and the separation pad rubber is rated around 25,000 and 50,000. In this article, you will acquire the illustrated replacement guidance.
Signs and symptoms of worn out rollers are disappointing grab. Some people mention that they have to sort of urge the pages along at the beginning to get it started feeding into the equipment and intermittent jamming takes place repeatedly. Signs and symptoms of a worn pad are usually multiple feeding or some like to call it, double feeding. If you find indications of either one of the aforementioned difficulties your best choice is to switch out these pieces. Most times if your having issues feeding, cleansing the rollers off slightly ought to get it back working once more for a bit of time till you can get the replacement parts acquired. Multiple feeding is actually worse and is hard to get it doing the job correctly until the separation pad is replaced.
Samsung SCX-4824FN ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Samsung SCX-4824FN ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Samsung SCX-4824FN ADF Roller Replacment and Separation Pad Replacement Parts
