Lanier AC122L ADF Roller Replacement Instructions G960-1179, G9601179, B273-9530, B2739530

October 29, 2016

32 Views 0

SaveSavedRemoved 0

Lanier AC122L ADF Roller Replacement Procedure G960-1179, G9601179, B273-9530, B2739530

On the next paragraphs, you will find the Lanier AC122L ADF Roller Replacement Function. Because we move more and more when it comes to scanning docs, I’ve witnessed and incline with the level of paper being fed from document feeders. Different products define different maintenance numbers regarding the roller and separation pad. I’d believe that however, if the roller is between 50,000 and 75,000 it more than likely ought to be changed additionally, the separation pad rubber is rated around 25,000 and 50,000. Further down, you will find the illustrated replacement tips.

Lanier AC122L ADF Roller Replacement tips

Warning signs of worn rollers are reduced grab. Most people will complain that they have to sort of push the documents along at the start to get it started feeding inside the unit and sporadic jamming appears on a regular basis. Warning signs of a old pad have proven to be numerous feeding or some like to call it, double feeding. If you notice signs and symptoms of either one of those situations your best option is to replace these components. Generally if your experiencing difficulty feeding, cleaning the rollers off a little bit ought to get it back doing the job once again for a short amount of time until you can get the materials purchased. Multiple feeding is normally more irritating and is challenging to get it functioning accordingly until the separation pad is exchanged.

Lanier AC122L Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)

Lanier AC122L ADF Roller Replacement Procedure

1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..

Lanier AC122L ADF Separation Replacement Procedure

1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.

There you have it. This job is pretty easy and has minimal cost.

Click on the link below to order in your Lanier AC122L ADF Roller and Separation Pad Replacement Parts

Lanier AC122L Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine) – $34.95
Genuine G960-1179 Doc Feeder (ADF) Pickup / Feed Roller Assembly for Lanier AC122L; Doc Feeder Part – Genuine Samsung Part; Lanier G960-1179 / G9601179 / B273-9530 / B2739530

Lanier AC122 Doc Feeder Separation Pad Assembly (Genuine) – $17.50
Genuine B273-9674 Doc Feeder Separation Pad Assembly for Lanier AC122; Doc Feeder Part – Genuine Samsung Part; Lanier B273-9674 / B273-9517 / B2739674 / B2739517