Gestetner DSM520PFL ADF Roller Replacement Instructions B273-9530, B2739530

 

Gestetner DSM520PFL ADF Roller Replacement Procedure B273-9530, B2739530

In this article, you will find the Gestetner DSM520PFL ADF Roller Replacement Routine. As we move more and more in the direction of scanning files, I’ve found and incline with the level of material being fed by way of document feeders. Different manufactures put completely different maintenance levels regarding the roller and separation pad. I’d say however, if the roller is between 50,000 and 75,000 it generally should really be replaced in addition the separation pad rubber is rated around 25,000 and 50,000. Beneath, you will discover the illustrated replacement advice.

Gestetner DSM520PFL ADF Roller Replacement tips

Warning signs of worn rollers are lousy pickup. A lot of people complain that they need to more or less push the pieces of paper along for starters to get it started feeding into the equipment and intermittent jamming occurs repeatedly. Warning signs of a worn pad are usually numerous feeding or some like to call it, double feeding. If you see signs of either one of these conditions your best bet is to change these components. In general when your experiencing difficulty feeding, cleaning the rollers off some what ought to get it back working yet again for a short amount of time till you can get the broken parts bought. Multiple feeding is usually more frustrating and is difficult to get it working adequately before the separation pad is changed.


Gestetner DSM520PFL Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)

Gestetner DSM520PFL ADF Roller Replacement Procedure

1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..

Gestetner DSM520PFL ADF Roller Replacement

Gestetner DSM520PFL ADF Separation Replacement Procedure

1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.

Gestetner DSM520PFL Separation Replacement

There you have it. This job is pretty easy and has minimal cost.

Click on the link below to order in your Gestetner DSM520PFL ADF Roller Replacement and Separation Pad Replacement Parts





We will be happy to hear your thoughts

Leave a reply

Shopping cart