Kyocera KM-C2525E, C3225E, C3232E, C4035E C8170-2 Call for Service
Kyocera KM-C2525E, C3225E, C3232E, C4035E C8170-2 Call for Service Instructions
Below you will find the service manual information for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8170-2 Call for Service along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8170-2 Call for Service
Kyocera KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E C8170-2 Call for Service
Description :
Adjustment motor problem (optional document finisher) The registration home position sensor cannot be detected to be on or off within 125 ms since the registration motor is activated after registration has started. The registration home position sensor cannot be detected to be on within 710 ms since the registration motor is acti- vated after registration has ceased.
Causes :
1. The adjustment motor connector makes poor con- tact.
2. Defective adjust- ment motor.
3. The adjustment home position sen- sor connector makes poor con- tact.
4. Defective adjust- ment home posi- tion sensor.
5. Defective finisher main PWB.
6.
Solutions :
1. Reinsert the connector. Also check for conti- nuity within the connector cable. If none, remedy or replace the cable.
2. Replace adjustment motor.
3. Reinsert the connector. Also check for conti- nuity within the connector cable. If none, remedy or replace the cable.
4. Replace the adjustment home position sen- sor.
5. Replace the finisher main PWB and check for correct operation.
5.
Remember, not every error is exactly the same. What fixes the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8170-2 Call for Service one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
