Kyocera KM-C2525E, C3225E, C3232E, C4035E C7000 Call for Service Instructions
Below you will find the service manual information for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C7000 Call for Service along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C7000 Call for Service
Kyocera KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E C7000 Call for Service
Description :
Toner motor problem The rated speed achievement signal wont turn to L in 5 s since the motor is activated. The rated speed achievement signal turns to H every other 5 s after the machine is stabilized.
Causes :
1. Poor contact in the connector termi- nals.
2. Broken the gear.
3. Defective toner motor M/C/Y/BK.
4. Defective engine PWB.
5.
6.
Solutions :
1. Check the connection of connector YC30 on the engine PWB and the connector on the toner motor, and the continuity across the connector terminals. Repair or replace if necessary.
2. Check visually and replace the gear if nec- essary.
3. Run maintenance item U135 and check if the toner motor operates. If not, replace the toner motor.
4. Replace the engine PWB and check for cor- rect operation
5.
5.
Remember, not every error is exactly the same. What fixes the Kyocera KM-C2525E, C3225E, C3232E, C4035E C7000 Call for Service one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.