Kyocera KM-C2525E, C3225E, C3232E, C4035E C2500 Call for Service
Kyocera KM-C2525E, C3225E, C3232E, C4035E C2500 Call for Service Instructions
Below you will find the service manual information for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C2500 Call for Service along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C2500 Call for Service
Kyocera KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E C2500 Call for Service
Description :
MP motor error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes :
1. Poor contact in the connector termi- nals.
2. Defective drive transmission sys- tem.
3. Defective engine PWB.
4. Defective MP motor.
5.
6.
Solutions :
1. Check the connection of connector YC26 on the engine PWB and the connector on the MP motor, and the continuity across the con- nector terminals. Repair or replace if neces- sary.
2. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
3. Run maintenance item U030 and check if YC26-5 (remote signal) on the engine PWB goes low. If not, replace the engine PWB
4. Run maintenance item U030 and check if the MP motor operates when YC26-5 (remote signal) on the engine PWB goes low. If not, replace the MP motor.
5.
5.
Remember, not every error is exactly the same. What fixes the Kyocera KM-C2525E, C3225E, C3232E, C4035E C2500 Call for Service one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
