Kyocera FS2020D, FS3920DN, FS4020DN Service Call 6000

 

Kyocera FS2020D, FS3920DN, FS4020DN Service Call 6000 Instructions

Below you will find the service manual information for the Kyocera FS2020D, FS3920DN, FS4020DN Service Call 6000 along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 


Kyocera FS2020D, FS3920DN, FS4020DN Service Call 6000

Service Manual Instructions for the Kyocera FS2020D, FS3920DN, FS4020DN Service Call 6000

6000 Broken fuser heater lamp wire
Description :
The temperature does not reach 100?C/ 212?F after the fuser heater lamp has been turned on continuously for 30 s.

35/37 ppm printer (EUR/USA model): The temperature does not rise by 1?C/ 1.8?F after the fuser heater lamp has been turned on continuously for 5 s during printing.

40/42 and 45/47 ppm printers (EUR/USA model): The temperature does not rise by 1?C/ 1.8?F after the fuser heater lamp has been turned on continuously for 10 s during warm-up or at standby.

Causes :
Poor contact in the fuser thermistor 1 connector terminals.

Fuser thermistor 1 installed incorrectly.

Fuser heater lamp installed incorrectly.

Broken fuser heater lamp wire.

Solutions :
Reinsert the connector.

Check and reinstall if necessary

Thermal cutout triggered.

Check for continuity.

If none, replace the thermal cutout.

Check and reinstall if necessary

Check for continuity.

If none, replace the fuser heater lamp.

Typically if you get an error like this your better off just ordering in a new fuser and get the bad boy replaced. If you feel like troubleshooting then I would test for continuity in the AC part of the circuit. Most times the thermal cutout located on top of the fuser has opened. In newer models the cutout is suppose to reset itself once it cools down. However, that rarely happens. If it is the new style then a shot of cold air from a can of air held upside down to the front surface of the cutout typically will reset it. The manufacture recommends replacing it though.

Below is the fuser replacement instructions along with a link to order in a replacement fuser.

Kyocera FS2020D FS3920DN FS4020DN Fuser Replacement

Kyocera Fuser Kit FK-350

$219.99  in stock
2 new from $186.00
Amazon.com
as of March 25, 2024 4:26 am

Features

  • 302J193050 302J193051 302J193052 30

Kyocera Fuser Kit FK-350


Remember, not every error is exactly the same. What fixes the Kyocera FS2020D, FS3920DN, FS4020DN Service Call 6000 one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

Kyocera Fuser Kit FK-350

Trocando Fusor FK-350

Retirando e instalando Fusor Kyocera FS-4020/3040/3540.

We will be happy to hear your thoughts

Leave a reply

Shopping cart