Canon imageRUNNER 1750, 1740, 1730 Error Code E575 8002 Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750, 1740, 1730 Error Code E575 8002 along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750, 1740, 1730 Error Code E575 8002
E575 8002 Gripper Motor (M7) error
Description :
Description When the Gripper Motor (M7) was operated, the Gripper Encoder Sensor (S8) detected rotation of 400 clocks or more.
Causes :
Gripper Motor (M7) error
Solutions :
Remedy
1. Check the connector connection of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
2. Check for open circuit of the Harness of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
3. Replace the Gripper Encoder Sensor (S8).
4. Replace the Gripper Motor (M7).
5. Replace the Finisher Controller PCB.
Remember, not every error is exactly the same. What fixes the Canon imageRUNNER 1750, 1740, 1730 Error Code E575 8002 one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
