Canon imageRUNNER 1750, 1740, 1730 Error Code E540 8001

 

Canon imageRUNNER 1750, 1740, 1730 Error Code E540 8001 Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750, 1740, 1730 Error Code E540 8001 along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750, 1740, 1730 Error Code E540 8001

Service Manual Instructions for the Canon imageRUNNER 1750, 1740, 1730 Error Code E540 8001

E540 8001 Stack Tray Shift Motor (M8) error

Description :
Description The gripper unit does not leave the gripper unit home position when the Gripper Motor (M7) has been driven for 3.8 seconds.

Causes :
Stack Tray Shift Motor (M8) error

Solutions :
Remedy

1. Check the connector connection of the Gripper HP Sensor (S7) or the Gripper Motor (M7).

2. Check for open circuit of the Harness of the Gripper HP Sensor (S7) or the Gripper Motor (M7).

3. Replace the Gripper HP Sensor (S7).

4. Replace the Gripper Motor (M7).

5. Replace the Finisher Controller PCB.

Remember, not every error is exactly the same. What fixes the Canon imageRUNNER 1750, 1740, 1730 Error Code E540 8001 one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart