Canon imageRUNNER 1750, 1740, 1730 Error Code E202 0000 Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750, 1740, 1730 Error Code E202 0000 along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 1750, 1740, 1730 Error Code E202 0000
E202 0000 CIS home position detection error
Description :
Description 1. Error when moving to the left side for HP check operation 2. Error when moving to the right side for HP check operation
Causes :
CIS home position detection error
Solutions :
Remedy
1. Disconnect and then connect the Flexible Cable (Reader Controller PCB (PCB3) Main Controller PCB (PCB2) 31pin).
2. Replace the Flexible Cable.
3. Replace the CIS HP Sensor (PS24).
4. Replace the Reader Motor (M10).
5. Replace the Reader Controller PCB (PCB3).
6. Replace the Main Controller PCB (PCB2).
Remember, not every error is exactly the same. What fixes the Canon imageRUNNER 1750, 1740, 1730 Error Code E202 0000 one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.