Kyocera FS1030MFP, FS1035MFP Call Service C4000 Error Code Instructions
Below you will find the service manual information for the Kyocera FS1030MFP, FS1035MFP Call Service C4000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera FS1030MFP, FS1035MFP Call Service C4000 Error Code
4000 Polygon motor (laser scanner unit) error
Description :
The polygon motor ready input is not given for 6 s during the polygon motor is ON.
Causes :
Defective harness between polygon motor and control PWB (YC10), or improper connector insertion.
Defective laser scanner unit.
Defective control PWB.
Solutions :
Reinsert the connector.
Also check for continuity within the connector harness.
If none, remedy or replace the harness.
Replace the laser scanner unit
Replace the control PWB
Remember, not every error is exactly the same. What fixes the Kyocera FS1030MFP, FS1035MFP Call Service C4000 Error Code one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
