Kyocera FS3900DN, FS4000DN Call Service 1010 Error Code Instructions
Below you will find the service manual information for the Kyocera FS3900DN, FS4000DN Call Service 1010 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera FS3900DN, FS4000DN Call Service 1010 Error Code
1010 Lift motor lock error
Description :
*35/37 and 45/47 ppm printers (EUR/USA model) only A motor over-current signal is detected continuously for 5 seconds since the lift motor is activated.
Causes :
Defective bottom plate elevation mechanism in the paper cassette.
Defective lift motor drive transmission system.
Defective lift motor.
Replace the lift motor.
Defective engine PWB.
Solutions :
Check to see if the bottom plate can move smoothly and repair it if any problem is found.
Check if the gears rotate smoothly.
If not, grease the bushings and gears.
Check for broken gears and replace if any.
Replace the engine PWB
Remember, not every error is exactly the same. What fixes the Kyocera FS3900DN, FS4000DN Call Service 1010 Error Code one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
