Kyocera FS2000D 4200 Error Code Troubleshooting Information

 

Kyocera FS2000D 4200 Error Code Troubleshooting Information Instructions

Below you will find the service manual information for the Kyocera FS2000D 4200 Error Code Troubleshooting Information along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 
Kyocera FS2000D 4200 Error Code

Service Manual Instructions for the Kyocera FS2000D 4200 Error Code Troubleshooting Information

4200 Laser output (pin photo sensor) error
Description :
The pin photo signal (PDN) is not output within a specified time after the polygon motor ready signal (POLRDYN) becomes ready (L level).
Causes :
Defective harness between PD PWB (YC1) and main PWB (YC12), or improper connector insertion. Defective APC PWB. Defective PD PWB. Defective main PWB.
Solutions :
Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Replace the laser scanner unit Replace the laser scanner unit Replace the main PWB

Remember, not every error is exactly the same. What fixes the Kyocera FS2000D 4200 Error Code Troubleshooting Information one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart