Kyocera FS3040MFP and FS3140MFP C7410 Error Code
Kyocera FS3040MFP and FS3140MFP C7410 Error Code Instructions
Below you will find the service manual information for the Kyocera FS3040MFP and FS3140MFP C7410 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera FS3040MFP and FS3140MFP C7410 Error Code
7410 Drum unit non- installing error
Description :
The drum unit is not installed or not installed properly.
The drum PWB EEPROM does not communicate normally.
Causes :
The drum unit is not installed.
Defective connector cable or poor contact in the connector.
Defective drum PWB EEPROM.
Defective engine PWB.
Solutions :
Install the drum unit Reinsert the connector.
Also check for continuity within the connector cable. If none, remedy or replace the cable.
Drum PWB (YC1) and connect-L PWB (YC3)
Replace the drum unit
Replace the engine PWB and check for correct operation
Remember, not every error is exactly the same. What fixes the Kyocera FS3040MFP and FS3140MFP C7410 Error Code one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
