Kyocera FS3040MFP and FS3140MFP C4200 Error Code

 

Kyocera FS3040MFP and FS3140MFP C4200 Error Code Instructions

Below you will find the service manual information for the Kyocera FS3040MFP and FS3140MFP C4200 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 
Kyocera FS3040MFP and FS3140MFP C4200 Error Code

Service Manual Instructions for the Kyocera FS3040MFP and FS3140MFP C4200 Error Code

4200 BD steady-state error 
Description :
BD steady-state error
Causes :
Defective connector cable or poor contact in the connector.
Defective laser scanner unit.
Replace the main PWB and check for correct operation

Solutions :
Reinsert the connector.
Also check for continuity within the connector cable. If none, remedy or replace the cable.
Laser scanner unit and main PWB (YC16)
Replace the laser scanner unit
Replace the main PWB and check for correct operation

Remember, not every error is exactly the same. What fixes the Kyocera FS3040MFP and FS3140MFP C4200 Error Code one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart