Kyocera FS3040MFP and FS3140MFP C6220 Error Code

 

Kyocera FS3040MFP and FS3140MFP C6220 Error Code

On this page you will find troubleshooting tips for the Kyocera FS3040MFP and FS3140MFP C6220 Error Code along with links to purchase a new fuser if needed. Also you will find a link at the bottom of the page to order in a new fuser if that is the next step you need to take to get your machine up and running again.

Kyocera FS3040MFP and FS3140MFP C6220 Error Code

$218.00
in stock
as of March 28, 2024 5:09 am
Amazon.com
Last updated on March 28, 2024 5:09 am

Service Manual Information for the Kyocera FS3040MFP and FS3140MFP C6220 Error Code

6220 Abnormally high fuser thermistor 1 temperature
Description :
The temperature of the fuser thermistor 1 detects 255°C/491°F or more continuously for 3 s.
Causes :
Shorted fuser thermistor 1.
Defective engine PWB.
Solutions :

Replace the fuser unit
Replace the engine PWB and check for correct operation

Other Advice for the Kyocera FS3040MFP and FS3140MFP C6220 Error Code

  1. Let the machine cool down for 15 minutes then try again.
  2. Check the temperature of the location. I tend not to recommend running the machine in temperatures over 85 decrees as they start to have problems cooling down.
  3. Make sure the machine is not sitting in direct sunlight like under a window.
  4. Make sure the machine has space around the edges. I tend to say at least 4 inches around the machine.
  5. Make sure nothing is blocking the cooling vents like paper taped on the side of the machine.
  6. Make sure the paper type settings on the machine match the paper being used.
  7. Remove the fuser and clean the thermistors
  8. Replace the fuser.

Click on the link below for the fuser replacement instructions
Kyocera FS3040MFP, FS3140MFP, FS3540MFP Fuser Replacement

$218.00
in stock
as of March 28, 2024 5:09 am
Amazon.com
Last updated on March 28, 2024 5:09 am

We will be happy to hear your thoughts

Leave a reply

Shopping cart