HP Color LaserJet M577 Document Feeder Kit Replacement
Below you will find the illustrated instructions for the HP Color LaserJet M577 Document Feeder Kit Replacement. These parts are rated at around 75,000 pages. Also, you will find links to purchasea replacement ADF Roller Kit if still needed.
ADF Roller kit – CLJ Ent M577 series
Remove the pickup and feed roller assembly
1. Open the document-feeder jam access door.
2. Release the blue locking arm.
3. Slide the pickup and feed roller assembly to the left, and then pull it away from the document feeder to remove it.
4. Rotate the top edge of the separation roller cover away from the printer to release it.
5. Remove the cover.
6. Slide the separation roller to the left, and then lift it up and away from the document feeder to remove it.
7. Unpack the replacement assemblies
CAUTION: Avoid touching the rollers. Skin oils deposited on the rollers might cause print quality problems.
HP recommends washing your hands before handling the rollers.
8. Install the separation roller
9. Lower the separation roller into the document feeder, and then slide it to the right to install it.
10. Position the bottom edge of the separation roller cover on the printer.
11. Rotate the cover down to close it.
12. The roller might seem loose until the cover is snapped closed. The cover helps hold the roller in place.
13. Position the pickup and feed roller assembly in the document feeder (callout 1), and then slide the
assembly to the right to install it.
14. Close the blue locking arm.
15. Close the document-feeder jam access door.