Lanier, Savin, Ricoh SP5200DN, SP5210DN Fuser Replacement

 

Lanier, Savin, Ricoh SP5200DN, SP5210DN Fuser Replacement – 406686

The Lanier, Savin, Ricoh SP5200DN, SP5210DN Fuser Replacement instructions are pretty straight forward. The fusers are rated at 120,000 along with the transfer roller, feed rollers, and sep pads. Below you will find the instructions for the the fuser replacement along with links to buy the PM kit if needed. It generally cost just as much for the PM kit as the fuser individually so it’s typically in your best interest to just by the kit.

Before handling the fusing unit, make sure that the unit is cool enough. The fusing unit can be very hot.
1. Open the rear cover.
2. Release the lock levers.
Lanier, Savin, Ricoh SP5200DN, SP5210DN Fuser Replacement
3. Pull the fusing unit out.

Lanier, Savin, Ricoh SP5200DN, SP5210DN – 406686 Maintenance Kit

For the fusing unit, there is a new unit detection mechanism. It is not necessary to reset the PM counter.
However, if you want to check out the counter values then follow the instructions below.
1. Turn on the main power switch.
2. Output the SMC logging data with SP5-990-004 and check the counter values.
3. Make sure that the PM counters for the replaced units are “0” with SP7-803. If the PM
counter for a unit was not reset, then reset that counter with SP 7-804.

We will be happy to hear your thoughts

Leave a reply

Shopping cart