Ricoh, Lanier, Savin SP C250 , SP C252 SC541 Error Code Service
Ricoh, Lanier, Savin SP C250 , SP C252 SC541 Error Code Service
The Ricoh, Lanier, Savin SP C250 , SP C252 SC541 is related to a thermistor error in the fusing assembly. Below you will find what the service manual has to say on the subject along with some additional advice. Also, you will find links to the illustrated replacement instructions, fuser error code reset information, and links to order a replacement fuser if needed.
Service Manual Advice for the Ricoh, Lanier, Savin SP C250 , SP C252 SC541 Error Code
Description : The thermistor output is less than 0°C for 7 seconds.
Disconnected thermistor
Defective harness connection
1. Check the harness connection of the thermistor.
2. Replace the fusing unit. Ricoh, Lanier, Savin SP C250 , SP C252 Fuser Replacement
Additional Advice for the Ricoh, Lanier, Savin SP C250 , SP C252 SC541 Error Code
- Reset the Fuser SC Error Code. These fuser errors can only be reset through service mode and while troubleshooting anytime you get this error or other fuser errors the code needs to be reset to proceed.
- Ricoh, Lanier, Savin SP C250 , SP C252 Fuser SC Reset Procedure
- Remove the fusing unit and check the fuser thermistors.
- It wouldn’t hurt to check the lamp and thermostat for continuity while you have the unit out.
- Make sure the thermistor is clean and riding gently on the surface of the hot roller.
- Check all connectors.
- Replace the fuser.
- Ricoh, Lanier, Savin SP C250 , SP C252 Fuser Replacement
