Canon imageRunner 2230, 2270, 2830, 2870, 3025 Fuser Replacement
Canon imageRunner 2230, 2270, 2830, 2870, 3025 Fuser Replacement
Below you will find the illustrated instructions for the Canon imageRunner 2230, 2270, 2830, 2870, 3025 Fuser Replacement along with links to purchase a replacement fuser if needed.
Canon imageRunner 2230, 2270, 2830, 2870, 3025 Fixing/Fuser Assembly – FM3-1278-000, FM2-0356-000
Canon imageRunner 2230, 2270, 2830, 2870, 3025 Removing the Right DoorÂ
1) Open the right door.
2) Remove the reuse band, and disconnect the connector.
3) Remove the 2 screws, and detach the right door.
Canon imageRunner 2230, 2270, 2830, 2870, 3025Â Attaching the Right Door
1) Match the hinge found at the bottom of the right door against the lug.
2) Engage the hinge found on the top of the right door with the hook found on the side plate.
When tightening the 2 screws used to fix the hinge in place, be sure to close the right door first.
Canon imageRunner 2230, 2270, 2830, 2870, 3025Â Fuser Replacement
1) Remove the screw, and detach the harness cover.
2) Disconcert the 3 connectors.
3) Remove the 4 screws.
4) Detach the fixing unit toward the front.
When mounting the harness cover, be sure to keep the harness within the space indicated in the figure so that the harness will not come into contact with the gear.
