Canon iR 2022i, 2025, 2030, 2018, 2022, 2018i Fuser Replacement
Canon imageRunner 2022i, 2025, 2030, 2018, 2022, 2018i Fuser Replacement
Below you will find the replacement instructions for the Canon iR 2022i, 2025, 2030, 2018, 2022, 2018i Fuser Replacement. At some point or another all machines will need this done, either through wear and tear or parts failure. Below you will find the illustrated instructions along with links to purchase a new fuser if needed.
Genuine FM0-0160-000, FM3-3651-000 Canon imageRUNNER 2022i, 2025, 2030, 2018, 2022, 2018i, Fuser (Fixing) Unit – 120 Volt
1) Open the front cover .
2) Turn the developing assembly locking lever clockwise to open the left door.
3) Draw out the drum unit
2) Detach the rear cover.
3) detach the left cover (rear).
4) Disconnect the connector of the junction harness and remove the reusable band, then remove the earth wire
5) Remove the screw securing the door support band. Remove the connector and reusable band, and release the duplex unit harness from the wire saddle.
6) Open the left door until it sops and pull out the hinge shaft.
7) Lift the left door with both hands to release it from the door rotation shaft, and then remove the left door.
8) Detach the inner cover at the upper front.
9) Detach the heater harness cover. Disconnect the connector.
10) Disconnect the two connectors, and then release the fixing unit harness from the wire saddles.
11) Raise the delivery upper guide. Remove the fixing unit.
